Dorado Air + TSR Trail Side Relief
PC+ Twin-Piston Cartridge
Inverted Design, 37mm Stanchions
191-38304-A302
Get Inverted
Back and better than ever the new Dorado Expert is ready to take on the gnarliest conditions mountain biking can provide. Whether you’re looking to cut seconds off the splits, lap the local park, or get sendy in the back hills of Utah the Dorado Expert has you covered. Featuring an all-new 37mm chassis, completely redesigned internals, and on-trail precision that only inverted forks can provide, the new Dorado is your ticket to the best ride you’ve ever had.
•New 37mm chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version
•Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain.
•Dorado Air Spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts.
•IVA (incremental Volume Adjust) modifies the volume in the positive air chamber with self contained spacers dictating the position of the IVA piston and your volume amount.
•New TPC+ Damper has increased oil volume and improved flow paths for improved bump compliance and increased consistency. TPC+ features two compression pistons, a hydraulic bottom out, and a spring backed IFP for a smooth and predictable feel for every impact. Adjustments include; High-speed compression, Low-speed compression, and Low-speed rebound.
•Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for ideal axle to crown measurements depending on wheelsize. The fork legs can be used with both wheel sizes. Please refer to owners manual located on the support tab for fitment and installation information.
•TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long.
•New 2 bolt drop crown features increased head tube length capability with 29" wheels.
•Wheel Size: 27.5", 29"
•Weight: 3120g
•Offset: 47mm and 57mm, both compatible with 27.5" & 29" wheels
•Ride Height: 582mm (27.5"), 602mm (29'')
•Travel: 180, 190, 203mm internally adjustable
•Spring: Dorado Air with Incremental Volume Adjust (IVA)
•Compression Damping: TPC+ with Hydraulic Bottom Out (HBO)
•Rebound Damping: Cartridge Adjustable TPC
•Adjustments: Air, Air Volume, Rebound, HS and LS Compression
•Steerer: 1-1/8" Straight
•Crown: Forged
•Leg Diameter: 37mm
•Leg Material: 6000 Series Aluminum
•Brake Post Mount: 203mm (223 Max)
•Axle: 110mm x 20mm BOOST Thru Axle
•Max Tire Size: 67mm
•Extras: Threaded TSR
•Options: Fender
•E-Bike Compatible: Yes
Need help finding the right fork? Check out our Fork Fitment Guide
Dorado Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel.
TSR Bleed screws allow excess pressure built up in the outer legs of the fork to be equalized with a simple threaded screw.
Dorado Expert features TPC+ in a half cartridge format that has a redesigned architecture that reduces pressure losses during the rebound stroke by separating the check-valve from the compression pistons. It also features a new single high-flow check valve design that increases flow paths for improved small-bump compliance and increased damping consistency. The HBO circuit has been moved inside the damping cartridge to be fully submerged within the damping fluid to further improve end-of-stroke consistency. The redesigned knob and detent design offers fine-tuning of the adjustment range. Both low and high-speed compression are adjusted independently of each other on the bottom of the fork with the rebound adjustment found on top.
Inverted forks provide an incredibly smooth and consistent feel due to the constant lubrication of the bushings and seals. Inverted forks also provide a major increase in fore-aft stiffness with much longer bushing overlap compared to traditional fork designs while maintaining torsional compliance which provides more control to the rider over rough trail sections.
37mm proved to be the perfect balance of increased stiffness, weight savings, and an ideal seal surface area for reduced friction. Compared to the previous 36mm version of the Dorado, the new 37mm alloy increased in stiffness at 20% for both fore-aft and torsionally when compared to the former 36mm. Dorado Expert is e-bike certified.
Ich habe bisher alle großen Hersteller durch und lande am Ende immer wieder bei Manitou. Ob Single Crown Federgabel oder double crown...
Die Dorado hat mich schon eine lange Zeit fasziniert aber hatte zu viele Befürchtungen bezgl. des Vorderrad flexes. Aber eines Tages musste ich dann doch zuschlagen und es war die beste Entscheidung die ich treffen konnte. Die Manitou Dorado ist die Feinfühligste und absolut am besten beherschbare Federgabel die ich bisher hatte. Der Flex am Vorderrad ist bei korrekter Montage des Vorderrads im Fahren nicht spührbar und die Gabel arbeitet absolut perfekt. Wenn Ihr eure Dorado Expert aufwerten wollt. Dann kann ich das IRT Kit noch empfehlen. Ist aber kein Muss!
Great fork’s even better price